Decorazza Alcantara

SURFACE REQUIREMENTS: Apply to previously prepared mineral substrates: concrete, concrete blocks, brickwork, cement, cement plaster, gypsum, gypsum and plasterboard boards, etc. The surface must be homogeneous, leveled, dry and clean. Remove existing weak parts and loose layers of old coatings. Smooth out cracks and chips using plaster or putty compounds. Sand the putty with fine sandpaper. Remove dust using a soft brush or vacuum cleaner. The quality of surface preparation must correspond to category K4 according to SP 71.13330.2017. CONSUMPTION: 0.10-0.15 kg/m2 TOOLS: Venetian trowel, stainless steel spatula, washer (round trowel), plastic trowel, putty, brush. Clean working tools with water immediately after completing work. APPLYING THE MATERIAL WITH A TROWEL (Suede effect): 1. Using a brush or roller, treat the surface with deep penetration primer Primer. Let dry for 2...4 hours. 2. Using a roller, apply paint primer Base in an even layer, leaving no traces of the roller coat, tinted to match the color of the finish coat. Let dry for 4...6 hours. 3. Decorative material Alcantara is ready for use. It is allowed to mix the tinted material using gyroscopic and vibrating mixers. 4. Apply the first layer of material with a stainless steel trowel, creating small beads of the material and after 2...5 minutes, return to the beads, forming a background coating, working in small areas of 1...2 m2, with the consumption specified by the manufacturer. Let dry for 2...4 hours. 5. Apply the second layer of material with a stainless steel trowel, creating small beads of material and after 2...5 minutes, return to the beads, forming a background coating, working in small areas of 1...2 m2, with the consumption specified by the manufacturer. Let dry for 2...4 hours. 6. Make the strokes elongated, with the plane of the trowel facing the surface, so that uneven edges are formed that characterize the drawing. Let dry 24 hours. APPLYING THE MATERIAL WITH A BRUSH (Nubuck effect): 1. Using a brush or roller, treat the surface with deep penetration primer Primer. Let dry for 2...4 hours. 2. Using a roller, apply paint primer Base in an even layer, leaving no traces of the roller coat, tinted to match the color of the finish coat. Let dry for 2...4 hours. 3. Decorative material Alcantara is ready for use. It is allowed to mix the tinted material using gyroscopic and vibration mixers 4. Apply the first layer of material with a brush in a multidirectional direction, working in small areas of 1...2 m2, with the consumption specified by the manufacturer. Let dry for 2...4 hours. 5. Apply the second layer of material with a brush in different directions, working in small areas of 1...2 m2, with the consumption specified by the manufacturer, after 2...5 minutes, return to the previously treated areas and remove brush marks, forming a coating. Let dry for 2...4 hours.