Decorazza Rustic

Surface preparation: The surface must be uniform, leveled, dry and clean. Remove existing weak parts and loose layers of old coatings. Smooth out cracks and chips using plaster or putty compounds. Sand the putty with fine sandpaper. Remove dust using a soft brush or vacuum cleaner. Application: 1. Before applying the decorative coating, protect unpainted areas with mounting tape or film. 2. Treat the surface with deep penetration primer Primer using a roller or brush. 3. After the primer has completely dried, apply primer-paint Primer di Quarzo with a roller; the resulting surface has a slight rough coating. After the first coat has completely dried, apply a second coat if necessary. Use a brush in hard-to-reach places. 4. Before application, if necessary, mix the material Rustic mechanically. The material is ready for application. 5. Application of the material should begin from the upper left corner, moving to the lower right. To avoid noticeable joints on the surface, always work on a wet edge, leaving a minimum amount of material around the edges. 6. When working with the tool, it is necessary to apply a thick layer of material to the center of the trowel with an auxiliary spatula. 7. Apply the material Rustic with a trowel in small sections using short or long cross movements to create areas of varying thickness. Wide, sparse strokes create a calmer texture, frequent and small strokes create a more decorative and effective texture. 8. To add color and increase decorative appeal, it is recommended to apply a glaze compound Cera Décor. after the texture has completely dried. Cera Décor should be applied with a brush in different directions in small sections. Without allowing the glaze to dry, remove brush marks. To do this, use a mitten that has been previously moistened and lightly rub the glazing composition with light circular movements. It should be taken into account that Cera Décor on the first layer is lighter than on the second. 9. Mixing with materials from other manufacturers is not allowed.