Decorazza Sollievo

1. Surface preparation: The surface must be uniform, leveled, dry and clean. Remove existing weak parts and loose layers of old coatings. Smooth out cracks and chips using plaster or putty compounds. Sand the putty with fine sandpaper. Remove dust using a soft brush or vacuum cleaner. 2. Before applying the decorative coating, protect unpainted areas with mounting tape or film. 3. Treat the surface with deep penetration primer Primer using a roller or brush. 4. After the primer has completely dried, apply primer-paint Primer di Quarzo with a roller; the resulting surface has a slight rough coating. After the first coat has completely dried, apply a second coat if necessary. Use a brush in hard-to-reach places. 5. Before application, mix the material Sollievo mechanically. The material is ready for application. 6. Application of the material should begin from the upper left corner, moving to the lower right. To avoid noticeable joints on the surface, always work on a wet edge, leaving a minimum amount of material around the edges. 7. To create a “chalet” effect, apply the material in small sections with a stainless steel trowel, creating thickness. Without allowing the material to dry, create the desired relief pattern using circular movements in different directions. 8. To create the “Vesuvius” and “Pompeii” effect, apply the 1st layer with a trowel in a thin layer over the surface, creating a fine relief pattern, using circular movements in different directions. After the first layer has completely dried, apply the 2nd layer locally in islands, forming a relief pattern in different directions. When forming a relief pattern, it is necessary to work with the tool, making elongated or longitudinal strokes, leaving uneven edges and relief marks, depending on the given pattern. 9. To add color and increase decorative appeal, it is recommended to apply materials Seta, Velluto, Cera Décor, Lucido, Pastello Vernici. with a large-pored sponge after the texture has completely dried. 10. Mixing with materials from other manufacturers is not allowed.